Interview Question for Experienced Professionals

------Interview Question for Experienced Professionals------

1 Tell me about your professional work experience

Ans: Brief only the achievements and how you did things to grow in technical aspects and how you did the problem solving in professional work life.

2. Explain about the technical Challenges in professional career so far and can you explain how you solved the technical challenges.

Ans: Explain about the accomplishments and improvements related to technical solution what you have provided to earlier/current company and how these technical solution helped to grow business.

3. How to select the material for component design

Ans: Choosing materials for a component, we take into account many different factors. These factors can be broken down into the following areas.

Material Properties

  è The expected level of performance from the material.

Material Cost and Availability

  è Material must be priced appropriately (not cheap but right).

  è Material must be available (better to have multiple sources).

Processing

  è Must consider how to make the part, for example:

Casting

Machining

Welding

Environment

  è The effect that the service environment has on the part.

  è The effect the part has on the environment. 

  è The effect that processing has on the environment.

4.What are the Common casting defects in sand casting process

Ans: 

5. Difference between Verification and Validation?

 Verification: Verify the function/geometry parts/software with respective to the Designers/R&D person requirement/Intended use.

Validation: Verify the function/geometry parts/software with respective to the Customer requirement/Intended use.

Interview Question for Freshers

-----------Interview Question for Freshers---------------------

1. Tell me about your self 

Ans: Brief only the achievements and how you did things to grow in technical & other aspects.

2. What are achievement you made so far.

Ans: Explain about the Paper presentation and explain about improvements parts of the paper presentation related  suitable example.

3. Where you will be see you after 5 years.

Ans : Explain very  minor context and explanation shall be connected to the your goals or aspiration with respective to the Resume.

4. What is your motive towards the professional career or what makes you to select this job .

Ans : Explain the goal towards the job profile how you will be achieving with your technical skill.

Technical Questions-Mechanical

1.The Difference Between True Stress and Engineering Stress?

Ans : 

Think about pulling a bar in tension.  Load divided by cross-sectional area is force, or stress.  But what cross section are you considering?  Before starting pull, the bar had a known cross-section of (let’s say) 0.5" wide x metal thickness.  It's easy to measure these, since it is your starting material.  At any load, the engineering stress is the load divided by this initial cross- area.  While you are pulling, the length increases, but the width and thickness shrink.  At any load, the true stress is the load divided by the cross-area at that instant.  Unless thickness and width are being monitored continuously during the test, you cannot calculate true stress.  It is, however, a much better representation of how the material behaves as it is being deformed, which explains its use in forming simulations.  In circle grid analysis, engineering strain is the % expansion of the circle compared to the initial diameter of the circle.  The relationships between engineering values and true values are: 

σ = s (1+e)    ε = ln (1+e)

Where "s" and "e" are the engineering stress and strain, respectively, and "" and "" are the true stress and strain, respectively.

2. Difference between engineering stress-strain and true stress-strain curve?

Engineering stress and strain (also sometimes called nominal stress and strain) are calculated based on the original dimensions of the material.

True stress and strain are calculated based on the actual dimensions of the material.

So when you do a tension test, the bar will begin to get thinner as it stretches. Engineering stress would be the force divided by the original area for the duration of the test. True stress would be the force divided by the actual area, at every time that a measurement is taken.

3.What are the different types of fits? Explain?.

Ans: 

1. Clearance fit. In this type of fit, the size limits for mating parts are so selected that clearance between them always occur. It may be noted that in a clearance fit, the tolerance zone of the hole is entirely above the tolerance zone of the shaft. In a clearance fit, the difference between the minimum size of the hole and the maximum size of the shaft is known as minimum clearance whereas the difference between the maximum size of the hole and minimum size of the shaft is called maximum clearance. The clearance fits may be slide fit, easy sliding fit, running fit, slack running fit and loose running fit.

2. Interference fit. In this type of fit, the size limits for the mating parts are so selected that interference between them always occur. It may be noted that in an interference fit, the tolerance zone of the hole is entirely below the tolerance zone of the shaft. In an interference fit, the difference between the maximum size of the hole and the minimum size of the shaft is known as minimum interference, whereas the difference between the minimum size of the hole and the maximum size of the shaft is called maximum interference. The interference fits may be shrink fit, heavy drive fit and light drive fit

3. Transition fit. In this type of fit, the size limits for the mating parts are so selected that either a clearance or interference may occur depending upon the actual size of the mating parts. It may be noted that in a transition fit, the tolerance zones of hole and shaft overlap. The transition fits may be force fit, tight fit and push fit.

 4. What is the difference between modulus of elasticity and modulus of rigidity?
Ans:

1.  Modulus of rigidity is valid for both elastic and non-elastic deformations while modulus of elasticity is only valid for elastic deformations.
2.  Elastic deformation is defined for forces normal to the surface while modulus of rigidity is defined for forces acting along the surface parallel to it.
3.  The deformation for the modulus of elasticity is linear while the deformation for the modulus of rigidity is a circular one.